Home > Lens Error > Lens Error E18

Lens Error E18

Contents

Some users have been able to manipulate the lens back into place (see reference links below). Here is a link to the fix. Banging my camera (gently or otherwise) did not seem to help. My daughter dropped her Casio Exilim EXZ75 and came to me saying 'Daddy please fix.' When turned on, the lens went all the way out but didn't return all the way his comment is here

You can try tapping while at the same time turning the camera on and off with your other hand. You may be able to remedy this problem by slightly twisting the barrel of the lens while fully extended (max. I really like the camera and havent had it long. the cylinder with the smaller diameter wouldn't completely retract and the picture was blurry. check over here

Canon Lens Error Restart Camera

Pay particular care not to scratch your lens barrel with the needle. I tried to push the lens towards the widest gap and heard a click. I fixed my roommate's E18 problem. The thing that worked for me is #7;; Forcing the lens in.

Even more Canon E18 experiences, plus a good listing of E18 errors by Canon model: Nikon Coolpix L3 Lens Error - This site has a few other fixes not listed here January 17, 2008 at 7:07 PM amgehan said... Reply Scot says: February 3, 2009 at 11:20 pm THANKS! Canon S110 Lens Error One widespread camera problem gets out-of-warranty repairs, another gets a lawsuit. (Grace Aquino, PC World, Tuesday 21 February 2006) ^ Repair guide ^ IXUS 40 aka SD300 Repair Guide ^ E18

The E18 error occurs when anything prevents the zoom lens from properly extending or retracting.[1] The error has become notorious in the Canon user community as it can completely disable the May 31, 2008 at 8:59 PM Summer said... I regret not doing this while on vacation because taking pictures was a real pain when the camera was busted. http://www.e18error.com/repair.html t00nz843z 1.234.080 προβολές 16:32 Canon Powershot S51 Error 18 / Lens stuck-up 031211.mpg - Διάρκεια: 5:34.

And while it should be obvious that anything can potentially fail [in infinite variation] typically, it's moving parts and poor contacts that are at fault -- And your site nailed it How To Restart Canon Camera AND MY MOM DIDN'T KNOW THAT I BOUGHT THE CAM YET. grrrrr i hate a non fixed camera!!!!! More people have reported success with this method than with any of the other methods (see the polls in the right column).

Lens Error Canon S100

I did exactly what you said and it worked. REVO_MOVO 81.418 προβολές 9:21 Φόρτωση περισσότερων προτάσεων… Εμφάνιση περισσότερων Φόρτωση... Σε λειτουργία... Γλώσσα: Ελληνικά Τοποθεσία περιεχομένου: Ελλάδα Λειτουργία περιορισμένης πρόσβασης: Ανενεργή Ιστορικό Βοήθεια Φόρτωση... Φόρτωση... Φόρτωση... Σχετικά με Τύπος Πνευματικά δικαιώματα Canon Lens Error Restart Camera THIS WORKED!!!!!!!!11 May 30, 2008 at 9:56 AM Anonymous said... Canon Camera Lens Error Will Shutdown Automatically I'd say go for it, or it's bigger brother at about the same price, the A570 IS.

charlotte,Lens errors, especially from falls are very common. this content Remove all screws, pop the strap-hook plate (sorry, probably not the most technical term there), then gently lift the front plate off by pulling up from the bottom, and remove the Removing the batteries and replacing may produce 2-3 extra shots. my camera was like jamming when the lens tried to come out and saying lens error, so i tried forcing it out and ended up snapping the front of the lense Canon Lens Error 01

June 5, 2008 at 12:52 PM Brett Green said... Lens error's are a potential problems for all digital cameras with a telescopic lens. thanks so much!i did everything.this helped so much :Dyayy! weblink After reading the link more closely, believe that you only need to go to step 8 to be able to remove/reseat the cable.CR January 4, 2008 at 10:36 AM darklurker said...

The buildup freezes up the ability of the lens to open. Canon Ixus Lens Error Will Shutdown Automatically Thanks so much! All it took was an extremely gentle rotation of the lens.

Powering the camera off and back on would reset the zoom, but only until zooming in again...

If not, remove the batteries and continue to step 11 where you have full access to the ribbon cable connector. Reply Elena, Italy says: February 4, 2009 at 4:22 am I have the same problem with a Powershot A85 bought in 2004: can anybody tell me if it works with such thank you Reply Mycool A says: August 19, 2009 at 8:33 pm Your steps worked like a charm! Canon Powershot A4000 Lens Error Thanks for the fix!

I suspect a ribbon cable became dislodged or slightly disconnected from its connector. striker1211 106.694 προβολές 2:08 "Lens Error. John-Hans Melcher 21.758 προβολές 1:40 CanonPowershot S2 IS review - Διάρκεια: 5:35. check over here You mention you haven't used the camera in ages.

Hii have a canon digital ixus60 or whatever its called... While powering up, i pulled the inner cylinder counter clockwise and felt a snap. Anyone else out there have any success by applying a tiny bit of oil around the lens barrel? Reinsert the cable only AFTER tapping the camera.

When i turn it on everything is fine, i can zoom, look at my pictures and everything. Dislodging Particles from Lens Barrel Gaps (Fix #5a) Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming Inserting this cable ensures that the camera's LCD screen remains off during the start process. Blowing compressed air into the lens did the trick!

But no matter its name, the issue involves a problem with the extension of the camera's lens mechanism (or lens barrels). thanks! Just put up a new post today for that type of problem. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply.

My wife did drop the camera accidentally and got the lenses stuck. The lens will get stuck in the extended position, and refuse to move either to focus the lens or to retract when powered off. If using rechargeables, and they're more than a year old, consider purchasing new rechargeable batteries as they may not be providing sufficient power to startup the camera. You will need to remove a small plate on the back of the lens assembly to look at the gears where you are likely to find a bit of sand or

If at first the focus seems to be off, turn the camera on and off and take lots of pictures, close ups and distance. Thanks for the help.